Telma EMR Technical
The following technical files can be viewed and downloaded for subsequent printing off-line.
- Health and Safety
The installation and service details described in this guide are for general guidance and details may vary from vehicle to vehicle. It is recommended that all maintenance and installations are carried out by suitably trained personnel in properly equipped workshops.
Ensure that, during any installation or maintenance procedure, the requirements of Health and Safety at Work and workshop best practices are strictly observed. When lifting or moving any major component, due consideration must be given to the weight and suitable lifting tackle with safety lugs and chains must always be used when lifting the retarder assembly
EMR does not seek to limit its liability for any acts of neglect which causes death or personal injury; otherwise no responsibility is accepted by Telma for damage or injury which may occur in circumstances which are beyond Telma’s control.
We make every effort to ensure that our technical documentation is kept up-to-date, and we would request that you advise of your particular interest so that, in the event of any updates or other bulletins which might be of interest to you, we can keep you informed.
All the documents listed are in Adobe Acrobat format. If the Acrobat plug-in does not automatically launch, open the Adobe Acrobat application before clicking on the document reference.
Click on the following files for viewing service information:
TEMR001 Service Specifications of Telma CE and CC Series Retarders Models CE30 to CC100
TEMR002 Service Specifications of Telma CE and CC Series Retarders Models CC125 to CC300
TEMR003 Service Specifications of Telma Focal Series Retarders Models F90 to F2400
TEMR004 Service Specifications of Telma Focal Series Retarders Models F2500 to F3300
TEMR005 Service Specifications of Telma M Series Retarders Models M271 to M3300
TEMR006 Service Specifications Minigenerators and Anti-vibration Mounts - alsp TDEMR140 below
TEMR007 Service Specifications of Telma Axial Series Retarders Models AC61-35 to AC83-31
TEMR008 Service Specifications of Telma Axial Series Retarders Models AE30-35 to AC61-25
TEMR009 Service Specifications of Telma Focal Series Retarders Models FV82-70 to FN83-30
TEMR010 Service Specifications of Telma Focal Series Retarders Models FN50-85 to FN72-40
TEMR011 Service Specifications of Telma Axial M Series Retarders Models AM82-71 to AM83-30
TEMR012 Service Specifications of Telma Axial AD Series Retarders Models AD50-55 to AD72-00
TDEMR140 Anti-vibration mount installation drawings
TEMR101 Gearbox installation of Telma Focal retarder; Procedure for initial installation on gearbox
TEMR102 Removal of Telma Focal retarder; Removal of retarder for subsequent refitting
TEMR103 Axle Installation of Telma Focal retarder; Procedure for initial installation on driven axle
TEMR104 Re-installation of Telma Focal retarder
TEMR201 Retarder Inspection - Telma Axial Series, CE, CC and M retarders
TEMR202 Routine maintenance - Telma Axial Series, CE, CC and M retarders
TEMR203 Retarder Inspection and maintenance - Telma Focal retarders
TEMR301 Diagnostics - Telma retarder control system
TEMR302 Diagnostics - Telma retarder
TEMR303 Telma control system Inspection
TEMR304 Telma control system - description and function
TEMR305 Telma Relay Box maintenance
TEMR306 Telma Foot-control system - description and checks
TEMR307 Over-ride and test Telma Speedswitch and ABS module for static tests
TEMR308 Retarder electrical check; Current draw and resistance checks
TNEMR190 Retarder Bearing Replace; Procedure for CC retarders with mainshaft securing nuts
TNEMR194 Retarder Bearing Replace; Procedure for CC retarders with mainshaft securing screws
- Safety Data